Made of Waste: Sawmill Offcuts in Mass Timber

In her thesis at IAAC’s Valldaura Labs, Agnieszka Szklarczyk studied how the half-round offcuts of a sawmill can become the top layer of mass timber panels, with 3D scanning, a digital library of waste pieces and full-scale prototypes.

The Challenge

The growing use of CLT and other engineered wood raises the question of where all the additional wood will come from, while waste timber, such as the offcuts of sawmills, is rarely given a high-value use.

Our Solution

A design workflow that scans sawmill offcuts with photogrammetry, stores them in a digital twin library and uses algorithms to compose them into structural panels inspired by CLT, tested with full-scale prototypes.

Type of Project

A master thesis of the 2021-2023 edition of the Master in Advanced Ecological Buildings and Biocities (today the Master in Ecological Architecture & Advanced Construction), supervised by Michael Salka at Valldaura Labs.

Project Outputs

A digital library of offcuts, panel design algorithms with fixed and flexible panel sizes, prototype panels and the proposal of the Offcut Shelter, a folded timber structure for drying and storing waste wood.

IAAC Barcelona

The Project

Interest in contemporary timber buildings and engineered wood products such as cross-laminated timber is growing fast, as a response to the ecological emergency. Consumption of primary processed wood products is expected to grow by 37% by 2050 in a business-as-usual scenario, and more in a bioeconomy scenario. At the same time, waste timber is handled in ways that ignore its qualities and its potential for high-value use.

The thesis reviews the existing literature and case studies, among them The Voxel quarantine cabin built at Valldaura, to identify the leaks of waste in the timber value chain, and focuses on the components that come from sawmilling. It then moves to practice-based prototypes with offcuts collected at the small sawmill of Valldaura Labs.

Design Approach

The offcuts were inventoried with photogrammetry, and their geometrical data formed a digital twin library to use the material as efficiently as possible. The prototypes refer directly to CLT construction and test how the half-round offcuts could form the top layer of a structural panel, also exploring characteristics of the material that are usually discarded. Two design variables were tested, one with a fixed panel size and one with a flexible panel size, and the prototype panels achieved a highly accurate thickness match for surface continuity.

Fabrication revealed material losses and surface issues linked to how the offcuts had been stored, exposed to sun and rain around the sawmill. This led to the Offcut Shelter, a folded structure made of independent strips of panels whose dimensions come directly from the digital library, oriented through climatic analysis to protect the wood from direct sun and open it to the northern winds, so that it dries evenly.

Who is it for?

The research addresses architects, timber manufacturers and sawmills interested in giving waste wood a structural and façade use in sustainable timber construction, and opens questions for further research towards commercial application.

IAAC Barcelona
IAAC Barcelona
IAAC Barcelona
IAAC Barcelona
IAAC Barcelona
IAAC Barcelona
IAAC Barcelona
Year

2021-2023

Location

Valldaura Labs, Collserola Natural Park, Barcelona

IAAC Department

Credits

Design team and collaborators

Author: Agnieszka Szklarczyk
Thesis supervisor: Michael Salka
Programme: Master in Advanced Ecological Buildings and Biocities, 2021-2023

Frequently asked questions

Made of Waste: Sawmill Offcuts in Mass Timber

What is the Made of Waste thesis about?

It studies how half-round offcuts from sawmills can be used as the top layer of mass timber structural panels, as an alternative to sending waste wood to low-value uses.

How were the offcuts used in the design?

The offcuts were scanned with photogrammetry to create a digital twin library, and algorithms composed them into panels with fixed or flexible sizes, tested with full-scale prototypes.

What is the Offcut Shelter?

It is a folded timber structure proposed by the thesis to store and dry offcuts properly, protecting them from direct sun and opening them to the northern winds, made of panel strips sized from the digital library.

Who wrote the thesis?

Agnieszka Szklarczyk wrote it in the 2021-2023 edition of IAAC’s Master in Advanced Ecological Buildings and Biocities, supervised by Michael Salka at Valldaura Labs.

How can a company work with IAAC on a similar project?

Companies and institutions can work with IAAC on timber waste, mass timber and circular construction through applied research, prototyping and innovation projects. The Innovation page explains how IAAC collaborates with industry; to discuss a project, write to [email protected].